# Industrial Liquid Coatings Market

> Industrial liquid coatings market worth USD 72.4 billion in 2025, reaching USD 112 billion by 2035 at 4.44% as ships, cans and steelwork need paint.

Publisher: Douglas Insights  
Author: Douglas Insights Research Desk  
Report code: DI-CM-10284  
Published: 2026-09-26  
Last updated: 2026-10-23  
Next review: Dec 2026  
Page: https://www.douglasinsights.com/industrial-liquid-coatings-market/

## Key figures

| Measure | Value | How it is built |
| --- | --- | --- |
| What it is | Factory and site-applied liquid paints | Paints, primers, clear coats and varnishes applied as a liquid to manufactured goods and structures; powder, architectural paint, refinish and floor systems excluded. |
| Market size · 2025 | $72.4 Bn | Units x price: about 18.9 million tonnes at USD 3,830 per tonne. |
| Forecast · 2035 | $112 Bn | Each 1-point change in volume growth moves the 2035 figure by about USD 11.4 billion. |
| Revenue CAGR · 2026–2035 | 4.44% | Volume from steelwork, ships, cans and new factories; price from waterborne, high-solids and specialty grades. |
| Volume · 2035 | ~25.2 Mn tonnes | Output of vehicles, ships, coil, cans, furniture and equipment times coating use per unit in 30 countries. |
| Leading segment | General industrial | Thousands of machinery, equipment and appliance makers each buy a few hundred tonnes. |
| Fastest segment | Aerospace and specialty | Aircraft output rising to clear record backlogs, with qualified high-price primers and topcoats. |
| Fastest region | Asia Pacific | Chinese shipyards, car plants and coil lines plus new capacity in India, Vietnam and Indonesia. |
| Leader share | ~9% | PPG leads; the five largest suppliers hold about 33%. |
| Event | 18 November 2025 | AkzoNobel and Axalta agreed an all-stock merger with about USD 17 billion of pro forma revenue. |

## Key takeaways

- Douglas Insights values the industrial liquid coatings market at USD 72.4 billion in 2025, rising to USD 112 billion by 2035 at 4.44% a year.
- The AkzoNobel and Axalta merger agreed on 18 November 2025 would create a group with about 11% of market value.
- General industrial leads at 29%; aerospace and specialty grows fastest at 6.9% a year.
- Asia Pacific uses 45.8% of value and grows fastest at 5.3% a year.
- Waterborne coatings rise from 38% to about 45% of value by 2035.

On 18 November 2025 AkzoNobel and Axalta agreed an all-stock merger of equals that will create a coatings group with about USD 17 billion of pro forma revenue and an enterprise value of about USD 25 billion, with closing expected between late 2026 and early 2027. The [merger announcement](https://www.akzonobel.com/en/media/media-releases/akzonobel-and-axalta-to-combine-in-all-stock-merger-of-equals-creating-a-premier-global-coatings-company) is the clearest sign that the largest suppliers see industrial coatings, not house paint, as the business worth consolidating. Douglas Insights values the industrial liquid coatings market at USD 72.4 billion in 2025 and forecasts USD 112 billion by 2035, a compound growth rate of 4.44%. The receipt is about 18.9 million tonnes of liquid coatings applied in factories in 2025 at an average realised price of USD 3,830 per tonne. Volume grows 2.9% a year as manufacturing output, infrastructure and shipbuilding expand, and price rises 1.5% a year as waterborne, high-solids and specialty formulas take share. The report sits within Douglas Insights coverage of [specialty chemicals](https://www.douglasinsights.com/industry/specialty-chemicals/) and follows the published [Douglas Insights research methodology](https://www.douglasinsights.com/research-methodology/).

## What is an industrial liquid coating, and what is left to powder and floor systems?

Industrial liquid coatings are paints, primers, clear coats and varnishes applied as a liquid to manufactured goods and structures in a factory or on a job site, worth USD 72.4 billion in 2025 on Douglas Insights' count. Seven end uses make up the market. General industrial covers machinery, agricultural and construction equipment, metal furniture, appliances and electronics housings. Protective and marine covers steel structures, bridges, tanks, pipelines, offshore platforms and ship hulls. Automotive OEM and parts covers electrocoat, primer, basecoat and clearcoat applied on car and truck assembly lines and on plastic and metal parts. Wood coatings cover furniture, cabinets, joinery and factory-finished flooring. Packaging coatings line and decorate beverage and food cans, closures and tubes. Coil coatings are applied to steel and aluminium strip before it is formed into roofing, cladding and appliance panels. Aerospace and specialty covers aircraft, rail, wind blades and other high-performance uses.

By technology the market spans solvent-borne, waterborne, and high-solids and radiation-cured coatings. Powder coatings, including the grades in the [Antimicrobial Powder Coatings Market](https://www.douglasinsights.com/antimicrobial-powder-coatings-market/) report and the [Battery Flame Retardant Powder Coating Market](https://www.douglasinsights.com/battery-flame-retardant-powder-coating-market/) report, resin-rich industrial floor systems covered in the [Industrial Floor Coating Market](https://www.douglasinsights.com/industrial-floor-coating-market/) report, architectural paint and automotive refinish sold to body shops are excluded.

## What does the AkzoNobel and Axalta merger tell buyers of industrial liquid coatings?

The merger tells buyers that the top of the industrial liquid coatings market is consolidating, with the combined group holding about 11% of 2025 value. Douglas Insights puts PPG, the current leader, at about 9%. The two companies expect about USD 600 million of run-rate cost synergies, most of it within three years, from plants, raw material purchasing and overlapping sales teams. For a car maker, a can maker or a coil line, fewer global suppliers means stronger negotiating power on the supplier side, but also deeper technical service and more capacity to qualify new waterborne and low-temperature cure products. AkzoNobel shareholders approved the deal on 5 August 2026. Douglas Insights threads the merger through this report: it sets the competitive map, it shapes price assumptions in automotive OEM and packaging, and a longer regulatory review is one of the swings in the scenarios.

## How does a tonne of industrial liquid coating get from resin kettle to a painted steel coil?

An industrial liquid coating is typically made in batches of 2 to 20 tonnes, and Douglas Insights estimates that resins and pigments account for 55% to 65% of its raw material cost. A formulator combines binders such as epoxy, polyurethane, acrylic, alkyd or polyester resin with pigments like titanium dioxide, extenders, additives including the wetting and dispersing agents sized in our [Surfactant Market](https://www.douglasinsights.com/surfactant-market/) report, and a carrier, which is either organic solvent or water. The mix is dispersed, tinted to specification and tested for viscosity, colour and cure before it ships in drums, totes or bulk tankers, while non-hazardous water-based grades increasingly cross oceans in the container bags sized in the [Flexitank Market](https://www.douglasinsights.com/flexitank-market/) report. At the customer, it is applied by spray, roller, dip, flow coat or electrodeposition, then cured by air, heat or ultraviolet light. A coil line running at 150 metres a minute applies a primer and topcoat a few microns thick in under a minute, while a ship hull may need 300 to 500 microns built up in several coats over days. Most industrial coatings are made close to customers because liquid paint is heavy and has a shelf life of 6 to 18 months, so the leading suppliers run hundreds of plants worldwide. That range of film thickness and cure speed is why each end use buys a different product at a very different price.

## What drives industrial liquid coating volumes from ship hulls to beverage cans?

Four drivers lift industrial liquid coating volumes by 2.9% a year, and infrastructure and energy steelwork is the largest. Bridges, transmission towers, [wind turbine](https://www.douglasinsights.com/wind-turbine-market/) towers, LNG tanks and pipelines all need multi-coat corrosion protection, and Douglas Insights estimates protective and marine coatings volume grows about 3.4% a year to 2035. Douglas Insights estimates that infrastructure, energy and industrial steelwork used about 3.1 million tonnes of liquid protective coatings in 2025, and each kilometre of large-diameter pipeline needs 40 to 60 tonnes for external and internal linings. A single offshore wind monopile needs roughly 8 to 12 tonnes of coating, and public infrastructure budgets in the United States, the European Union, India and the Gulf keep that steelwork flowing.

Shipbuilding is the second driver. Order books at Chinese, Korean and Japanese yards reached their highest level in more than a decade as owners renewed fleets for lower-emission fuels, and every new vessel needs anticorrosive primers, ballast tank coatings and antifouling topcoats. Douglas Insights estimates marine newbuild coatings volume grows about 4% a year to 2030 before easing, with dry-dock maintenance adding a steadier layer. Each large container ship or tanker needs 150 to 300 tonnes of coatings at build, so a yard delivering 100 ships a year consumes 15,000 to 30,000 tonnes.

Packaging is the third driver. Beverage cans keep taking share from plastic bottles, and PPG reported double-digit volume growth in packaging coatings in late 2025 in its [full-year 2025 results](https://investor.ppg.com/news/news-details/2026/PPG-reports-fourth-quarter-and-full-year-2025-financial-results/default.aspx), in which its Industrial Coatings segment sold USD 6.5 billion. Douglas Insights values packaging coatings at USD 6.51 billion in 2025, growing 5.2% a year, helped by the shift to bisphenol-free internal can linings, which sell at a premium.

Reshoring and new factory capacity is the fourth driver. Battery, electric vehicle, electronics and machinery plants built in North America, Europe, India and Southeast Asia since 2022 are now painting parts, and Douglas Insights estimates they add about 0.4 points a year to general industrial volume growth through 2030. Each new automotive assembly plant consumes roughly 3,000 to 5,000 tonnes of coatings a year once it runs at full rate. Defence spending in Europe and North America adds a further pull, as armoured vehicles, munitions and naval vessels use qualified camouflage and chemical-agent-resistant coatings.

## What holds back industrial liquid coatings as powder and solvent limits bite?

Three restraints are built into the industrial liquid coatings forecast, and substitution by powder coatings is the first. Powder contains no solvent, can be reclaimed and reused, and now covers much of the metal furniture, appliance and shelving market; Douglas Insights estimates powder already holds about 17% of factory-applied coating value outside vehicle bodies. Douglas Insights removes about 0.5 points a year from liquid volume growth in general industrial uses for this shift.

Weak automotive output is the second restraint. Global light vehicle production has been close to flat since 2023, and electric vehicles carry fewer painted engine parts and more pre-finished aluminium and plastic panels. Douglas Insights holds automotive OEM and parts coatings growth to 3.5% a year, below the market average.

Raw material and energy cost swings are the third restraint. Titanium dioxide, epoxy and isocyanate prices moved by 20% to 40% within a year during 2021 to 2023, squeezing formulator margins and prompting customers to thin films and cut coats. Formulators typically recover cost increases only after 3 to 9 months. Price rises of 1.5% a year assume raw material costs stay broadly stable.

## Which end use carries the value in industrial liquid coatings?

General industrial carries the most value at 29% of 2025 spending, USD 21.0 billion, while aerospace and specialty is the fastest-growing segment at 6.9% a year.

| Industrial liquid coatings end use | 2025 value | Share | CAGR 2026-2035 |
| --- | --- | --- | --- |
| General industrial | USD 21.0 billion | 29% | 4.0% |
| Protective and marine | USD 13.8 billion | 19% | 4.6% |
| Automotive OEM and parts | USD 11.6 billion | 16% | 3.5% |
| Wood coatings | USD 8.69 billion | 12% | 4.1% |
| Packaging coatings | USD 6.51 billion | 9% | 5.2% |
| Aerospace and specialty | USD 5.79 billion | 8% | 6.9% |
| Coil coatings | USD 5.07 billion | 7% | 4.3% |

General industrial is worth USD 21.0 billion in 2025. Thousands of machinery, equipment and appliance makers each buy a few hundred tonnes, so it is the broadest and most fragmented end use.

Protective and marine is worth USD 13.8 billion in 2025 and grows 4.6% a year, because steel structures and ships need thick multi-coat systems and repainting every 10 to 25 years.

Automotive OEM and parts is worth USD 11.6 billion in 2025. Every car body carries about 10 to 15 kilograms of coating, but slow vehicle output holds growth to 3.5% a year.

Wood coatings are worth USD 8.69 billion in 2025, led by furniture and cabinet makers in China, Vietnam, Poland and Italy, where waterborne and UV-cured lacquers are replacing nitrocellulose finishes.

Packaging coatings are worth USD 6.51 billion in 2025 and grow 5.2% a year as cans replace plastic and bisphenol-free linings command premium prices.

Aerospace and specialty is worth USD 5.79 billion in 2025 and grows fastest at 6.9% a year, because aircraft production is rising to clear record Airbus and Boeing backlogs and each wide-body jet needs several hundred kilograms of qualified primers and topcoats.

Coil coatings are worth USD 5.07 billion in 2025. Pre-painted steel and aluminium for roofing, cladding and appliances make it a high-volume, low-price end use.

### How does technology split industrial liquid coatings spending?

By technology, Douglas Insights estimates solvent-borne coatings at USD 35.5 billion (49%) of 2025 value, waterborne coatings at USD 27.5 billion (38%), and high-solids and radiation-cured coatings at USD 9.41 billion (13%). Solvent-borne remains dominant in protective, marine and coil uses where cure speed and film build matter most. Waterborne is the fastest-growing technology at about 6.3% a year, against about 2.6% for solvent-borne and 5.1% for high-solids and radiation-cured grades.

## Which region consumes the most industrial liquid coatings, and how far ahead is Asia Pacific?

Asia Pacific consumes the most industrial liquid coatings at 45.8% of 2025 value, USD 33.2 billion, and also grows fastest at 5.3% a year. China alone applies more than a third of the world's industrial coatings, across shipyards, car plants, coil lines and furniture factories, while India, Vietnam and Indonesia add new manufacturing capacity each year. The region reaches USD 55.6 billion by 2035.

Europe consumes USD 16.1 billion in 2025 and grows 3.2% a year, the slowest rate, as weak car and machinery output offsets strong offshore wind and defence work. Germany, Italy and Poland lead European consumption, while Dutch, Nordic and Spanish fabricators buy heavy-duty systems for offshore structures. Country-by-country detail, on a European scope that also counts body-shop refinish, is in our [Europe Industrial Liquid Coatings Market](https://www.douglasinsights.com/europe-industrial-liquid-coatings-market/) report.

North America consumes USD 14.3 billion and grows 3.6% a year, supported by reshored battery, vehicle and electronics plants and by infrastructure repainting. Latin America consumes USD 5.14 billion and grows 4.6% a year, led by Brazilian and Mexican automotive and appliance production. The Middle East and Africa is the wildcard at USD 3.62 billion and 4.56% a year, where Gulf energy, petrochemical and desalination projects need heavy-duty protective coatings.

## Which companies supply industrial liquid coatings, and how will the AkzoNobel-Axalta deal reshuffle them?

Douglas Insights estimates that the five largest industrial liquid coatings suppliers hold about 33% of 2025 value, led by PPG at about 9%.

| Supplier | Industrial liquid coatings strength | Est. 2025 share |
| --- | --- | --- |
| PPG | Automotive OEM, packaging, aerospace and industrial | 9% |
| Sherwin-Williams | General industrial, coil and wood, protective | 8% |
| AkzoNobel | Coil, packaging, wood, protective and marine | 6% |
| Nippon Paint | Automotive and industrial across Asia | 5% |
| Axalta | Light and commercial vehicle OEM coatings, industrial | 5% |
| BASF Coatings, Jotun, Hempel, Kansai, RPM, Beckers and regional makers | E-coat, marine, protective, coil and local supply | 67% |

Advantage in industrial liquid coatings rests on qualification: once a coating is approved on an assembly line, a can line or an aircraft, switching means months of testing, so incumbents keep business for years. PPG leads automotive OEM, packaging and aerospace. Sherwin-Williams is strong in general industrial, coil and wood. AkzoNobel is a leader in coil, packaging and marine, and Axalta in vehicle OEM coatings, so the merged group would cover almost every end use. Jotun and Hempel dominate marine and protective, Nippon Paint and Kansai lead in Asian automotive, and thousands of regional makers serve local general industrial and wood customers.

## What price does a tonne of industrial liquid coating fetch, from coil primer to aerospace topcoat?

Industrial liquid coatings sold for an average of USD 3,830 per tonne in 2025, and Douglas Insights expects about USD 4,440 by 2035. Coil primers and backers sell for USD 2,500 to USD 3,500 per tonne, general industrial enamels for USD 3,000 to USD 4,500, wood lacquers for USD 3,000 to USD 5,000, protective epoxy and polyurethane systems for USD 4,000 to USD 7,000, and automotive basecoats and clearcoats for USD 5,000 to USD 9,000. Marine antifouling coatings with biocides sell for USD 8,000 to USD 15,000 per tonne, and bisphenol-free can linings carry a 10% to 20% premium over older epoxy linings. Aerospace primers and topcoats, which need qualification by aircraft makers, sell for USD 20,000 to USD 60,000 per tonne. Large customers buy on multi-year contracts with raw material pass-through clauses, and car makers increasingly pay per painted vehicle rather than per litre.

## How fast is waterborne chemistry taking share inside industrial liquid coatings?

Waterborne chemistry is taking about 0.7 points of share a year inside industrial liquid coatings, rising from 38% of 2025 value to about 45% by 2035 on Douglas Insights' estimate. Waterborne coatings replace most of the organic solvent with water, cutting volatile organic compound emissions by 60% to 90%, which lets a factory stay under its emission permit without adding costly thermal oxidisers. Automotive basecoats in Europe and North America are already largely waterborne, and wood, general industrial and packaging lines are following. The hurdles are slower drying in humid climates, higher energy for curing ovens and weaker performance on some heavy-duty steelwork, which is why protective and marine coatings shift to high-solids rather than water. Waterborne and high-solids grades sell at a 5% to 15% premium, which is part of the 1.5% annual price rise in this forecast.

## Which solvent emission laws shape industrial liquid coating formulas?

Solvent emission law is the main force on industrial liquid coating formulas. In the European Union, Chapter V and Annex VII of the [Industrial Emissions Directive 2010/75/EU](https://eur-lex.europa.eu/eli/dir/2010/75/oj/eng) set emission limits and solvent management plans for coating installations above set solvent consumption thresholds. In the United States, the [Environmental Protection Agency](https://www.epa.gov/) sets national emission standards for surface coating of metal parts, plastic parts, wood furniture and automobiles, and California air districts set stricter volatile organic compound caps. China's national standards cap solvent content in industrial protective, vehicle and wood coatings. Chemical rules add a second layer: EU restrictions on diisocyanates require training for users of polyurethane products, and bisphenol A restrictions in food-contact materials are pushing can makers to new internal linings.

## How large could industrial liquid coatings grow by 2035 if factory output stalls or reshoring holds?

The base scenario takes the industrial liquid coatings market to USD 112 billion by 2035, with a range of USD 90.1 billion to USD 135 billion. The base case combines 2.9% volume growth with a 1.5% annual price rise for 4.44% a year. The stall scenario assumes weak car output, faster powder substitution and a long AkzoNobel-Axalta review that slows product launches, setting the legs at 1.6% and 0.6% for USD 90.1 billion. The reshoring scenario assumes new factories, shipbuilding and energy steelwork stay strong and specialty grades take share faster, setting the legs at 4.0% and 2.3% for USD 135 billion. Each 1-point change in volume growth moves the 2035 figure by about USD 11.4 billion.

## Douglas Exclusive: the industrial liquid coatings line-conversion tracker

The line-conversion tracker follows about 4,000 named coating lines at car plants, can makers, coil lines, shipyards and large equipment makers in 30 countries, recording each line's technology, supplier, annual tonnage and planned switch to waterborne, high-solids or powder. Resin and curing chemistry behind these coatings is covered in the [Epoxy Resin Curing Accelerator Market](https://www.douglasinsights.com/epoxy-resin-curing-accelerator-market/) and [Polyurethane Market](https://www.douglasinsights.com/polyurethane-market/) reports.

## Methodology and receipts: how do 18.9 million tonnes add up to USD 72.4 billion?

The industrial liquid coatings model is built bottom-up from tonnes. The headline receipt is 18.9 million tonnes multiplied by USD 3,830 per tonne, giving USD 72.4 billion for 2025. Tonnage is built from output in 30 countries of vehicles, ships, coil, cans, furniture and equipment, multiplied by coating use per unit, and cross-checked against supplier segment sales, including PPG's USD 6.5 billion Industrial Coatings segment, and trade data. Prices are set by end use and technology from supplier disclosures and contract data. The forecast compounds 2.9% volume growth and 1.5% annual price growth from the 2025 base to about 25.2 million tonnes and USD 112 billion in 2035.

## Market by segment

| Segment | Share | Value |
| --- | --- | --- |
| General industrial | 29% | $21.0 Bn |
| Protective and marine | 19% | $13.8 Bn |
| Automotive OEM and parts | 16% | $11.6 Bn |
| Wood coatings | 12% | $8.69 Bn |
| Packaging coatings | 9% | $6.51 Bn |
| Aerospace and specialty | 8% | $5.79 Bn |
| Coil coatings | 7% | $5.07 Bn |

## Market by region (USD million)

| Region | 2025 | 2026 | 2035 | CAGR 2026-2035 |
| --- | --- | --- | --- | --- |
| Global | 72,387 | 75,603.5 | 111,808.5 | 4.44% |
| Asia Pacific | 33,153.2 | 34,910.3 | 55,566 | 5.3% |
| Europe | 16,142.3 | 16,658.9 | 22,118.8 | 3.2% |
| North America | 14,332.6 | 14,848.6 | 20,413.7 | 3.6% |
| Latin America | 5,139.5 | 5,375.9 | 8,058.2 | 4.6% |
| Middle East and Africa | 3,619.4 | 3,784.4 | 5,651.8 | 4.56% |

## Dataset

| Series | Value | Unit |
| --- | --- | --- |
| Market size 2025 | 72,387 | USD million |
| Market size 2035 | 111,808.5 | USD million |
| Revenue CAGR 2026-2035 | 4.44 | percent |
| Volume CAGR 2026-2035 | 2.9 | percent |
| Price CAGR 2026-2035 | 1.5 | percent |

## Frequently asked questions

### What is an industrial liquid coating?

A paint, primer, clear coat or varnish applied as a liquid to manufactured goods and structures, from car bodies and cans to ship hulls and steel coil. Industrial liquid coatings were a USD 72.4 billion market in 2025, about 18.9 million tonnes.

### How big is the industrial liquid coatings market?

USD 72.4 billion in 2025, on Douglas Insights' count of about 18.9 million tonnes applied at an average of USD 3,830 per tonne.

### How fast is the industrial liquid coatings market growing?

4.44% a year to USD 112 billion by 2035: 2.9 points from more tonnes and 1.5 points from a higher price per tonne.

### Which industrial liquid coatings end use is largest?

29% of 2025 value, USD 21.0 billion, goes to general industrial coatings for machinery, equipment and appliances.

### Which segment grows fastest, and why?

6.9% a year: aerospace and specialty coatings grow fastest, because aircraft makers are raising output to clear record Airbus and Boeing backlogs and each jet needs qualified, high-price primers and topcoats.

### Are waterborne coatings replacing solvent-borne industrial coatings?

38% of 2025 value is waterborne, rising to about 45% by 2035, while solvent-borne still holds 49% in protective, marine and coil uses.

### How much do industrial liquid coatings cost per tonne?

USD 3,830 per tonne on average in 2025, from USD 2,500 for coil primers to USD 60,000 for qualified aerospace topcoats.

### Which region uses the most industrial liquid coatings?

45.8% of 2025 value, USD 33.2 billion, is Asia Pacific, which also grows fastest at 5.3% a year.

### Which companies lead industrial liquid coatings?

About 9% of 2025 value goes to PPG; the five largest suppliers hold about 33%, and the AkzoNobel and Axalta merger would create a group near 11%.

## Sources

- [AkzoNobel, AkzoNobel and Axalta to combine in all-stock merger of equals, creating a premier global coatings company](https://www.akzonobel.com/en/media/media-releases/akzonobel-and-axalta-to-combine-in-all-stock-merger-of-equals-creating-a-premier-global-coatings-company)
- [AkzoNobel, Merger information: AkzoNobel and Axalta](https://www.akzonobel.com/en/merger-information)
- [PPG Industries, PPG reports fourth quarter and full-year 2025 financial results](https://investor.ppg.com/news/news-details/2026/PPG-reports-fourth-quarter-and-full-year-2025-financial-results/default.aspx)
- [EUR-Lex, Publications Office of the European Union, Directive 2010/75/EU on industrial emissions](https://eur-lex.europa.eu/eli/dir/2010/75/oj/eng)

## How to cite

Douglas Insights, "Industrial Liquid Coatings Market", DI-CM-10284, updated 2026-10-23, https://www.douglasinsights.com/industrial-liquid-coatings-market/
