# Silicon Carbide Wafer Laser Cutting Equipment Market

> SiC wafer laser cutting equipment: USD 153.1 million in 2025, USD 568.2 million by 2035, as 200 mm fabs swap wire saws for laser slicing. Prices and shares.

Publisher: Douglas Insights  
Author: Douglas Insights Research Desk  
Report code: DI-IT-10528  
Published: 2026-10-07  
Last updated: 2026-10-07  
Next review: Apr 2027  
Page: https://www.douglasinsights.com/silicon-carbide-wafer-laser-cutting-equipment-market/

## Key figures

| Measure | Value | How it is built |
| --- | --- | --- |
| Market size · 2025 | $153.1 Mn | 268 systems x USD 571,300 = USD 153.1 million |
| Forecast · 2035 | $568.2 Mn | USD 153.1 million grown at 14.01% a year |
| Revenue CAGR · 2026-2035 | 14.01% | volume and price legs compounded |
| Volume · 2035 | 747 systems | 268 systems grown 10.8% a year |
| Leading segment | Laser ingot slicing systems, 38.6% | highest price per tool and kerf savings |
| Fastest segment | Laser ingot slicing systems, 15.4% | 8-inch boule lines need new slicers |
| Fastest region | Middle East and Africa, 16.3% | small base, planned power device sites |
| Market leader | DISCO, 41.8% (estimate) | KABRA slicing and Stealth Dicing laser saws |
| Event | Wolfspeed emerged from restructuring, 29 Sep 2025 | Wolfspeed investor release |

## Key takeaways

- Silicon carbide wafer laser cutting equipment reaches USD 568.2 million by 2035 from USD 153.1 million in 2025, at 14.01% a year.
- Laser ingot slicing systems hold 38.6% of 2025 revenue and grow fastest, at 15.4% a year.
- Asia Pacific buys 61.9% of 2025 equipment value; the Middle East and Africa grows fastest at 16.3%.
- DISCO leads with an estimated 41.8% share and the top three suppliers hold 57.7%.
- 8-inch tools rise from 47.2% of value in 2025 to 79.0% by 2035 in the SiC Laser Process Atlas.

Silicon carbide wafer laser cutting equipment is a USD 153.1 million business in 2025, heading for USD 568.2 million by 2035 at 14.01% a year. The Silicon Carbide Wafer Laser Cutting Equipment market covers the laser systems that slice silicon carbide (SiC) ingots into wafers and that dice finished SiC device wafers into chips; it includes laser ingot slicing, stealth dicing, ablation and grooving, and thermal or water-guided laser separation tools. Douglas Insights counts 268 systems shipped in 2025 at an average USD 571,300 each, and 268 x USD 571,300 = USD 153.1 million. Buyers spent cautiously after a hard year for SiC device makers, and the clearest marker is that Wolfspeed completed its financial restructuring on 29 September 2025, cutting debt by about 70% [according to the company](https://investor.wolfspeed.com/news/news-details/2025/Wolfspeed-Successfully-Completes-Financial-Restructuring-Emerges-as-Financially-Stronger-Company-Well-Positioned-in-Silicon-Carbide-Market/default.aspx). The study belongs to our [semiconductor equipment](https://www.douglasinsights.com/industry/ict-semiconductors/semiconductor-equipment/) coverage and follows the [Douglas Insights research methodology](https://www.douglasinsights.com/research-methodology/).

## How much does a SiC laser slicing or stealth dicing system cost per unit?

A SiC laser cutting tool sells for USD 0.24 million to USD 1.35 million in 2025, depending on process. Laser ingot slicing systems sit at the top because one tool replaces a bank of diamond wire saws, while ablation and grooving tools for silicon carbide device wafers sit at the bottom. The blended average is USD 571,300 per system.

| Process type | Realised price band, USD | Midpoint, USD | Implied 2025 units |
| --- | --- | --- | --- |
| Laser ingot slicing systems | 0.95 to 1.35 million | 1,150,000 | 51 |
| Stealth dicing systems | 0.40 to 0.60 million | 500,000 | 97 |
| Laser ablation and grooving systems | 0.24 to 0.38 million | 310,000 | 85 |
| Thermal laser separation and water-guided laser systems | 0.44 to 0.66 million | 550,000 | 35 |

Douglas Insights puts the realised band for a fully automatic laser ingot slicing system at USD 0.95 million to USD 1.35 million, before the grinder and polisher that follow it in the line. Stealth dicing systems for 6-inch and 8-inch SiC wafers clear at USD 0.40 million to USD 0.60 million. Thermal laser separation and water-guided laser systems land at USD 0.44 million to USD 0.66 million. The midpoint mix implies about 268 tools, matching the 268 counted, so the price and volume views agree.

The average price rises 2.9% a year in the base case, reaching about USD 760.4 thousand by 2035. Two forces pull in opposite directions. The 8-inch (200 mm) tool carries a premium of roughly 18% over a 6-inch (150 mm) tool, and its share climbs. Against that, Chinese laser saw makers quote 30% to 45% below Japanese and European list prices on 6-inch SiC lines. Service contracts add 6% to 9% of the tool price each year and are excluded from the equipment figure.

## Which laser process type leads silicon carbide wafer cutting equipment revenue?

Laser ingot slicing systems lead with 38.6% of 2025 revenue, or USD 59.1 million, because each SiC ingot slicer is the most expensive laser tool in the wafer line. Stealth dicing follows, and laser ingot slicing also grows fastest, at 15.4% a year to 2035.

| Segment | Share 2025 | 2025 value | Growth 2026-2035 | 2035 value |
| --- | --- | --- | --- | --- |
| Laser ingot slicing systems | 38.6% | USD 59.1 million | 15.4% | USD 247.5 million |
| Stealth dicing systems | 31.7% | USD 48.5 million | 13.2% | USD 167.6 million |
| Laser ablation and grooving systems | 17.2% | USD 26.3 million | 11.3% | USD 76.7 million |
| Thermal laser separation and water-guided laser systems | 12.5% | USD 19.2 million | 14.8% | USD 76.4 million |

Laser ingot slicing systems are worth USD 59.1 million in 2025 and USD 247.5 million by 2035; the share is large because substrate makers buy them to cut kerf loss, and the growth is fastest because every new 8-inch boule line needs them.

Stealth dicing systems hold 31.7% and USD 48.5 million, growing 13.2% a year, since internal-modification dicing avoids chipping on hard SiC device wafers and leaves no kerf.

Laser ablation and grooving systems carry 17.2% and USD 26.3 million; they are the cheapest tools and grow slowest, at 11.3%, because many fabs still pair them with blade saws rather than replacing them.

Thermal laser separation and water-guided laser systems take the remaining 12.5%, or USD 19.2 million, and grow 14.8% a year as fabs test particle-free separation on thin SiC power wafers. Douglas Insights expects the slicing segment to lift its share from 38.6% to 43.6% by 2035.

By wafer size the market splits into 6-inch wafers and 8-inch wafers, and by end user into integrated device manufacturers (IDMs), foundries and SiC substrate makers; both splits are modelled in the atlas below.

## Why is demand for SiC laser cutting tools rising with 200 mm wafer fabs?

Silicon carbide wafer laser cutting equipment volume grows 10.8% a year, split 4.3 points from 200 mm fabs, 3.6 from electric drivetrains and 2.9 from laser-for-wire substitution. Each driver is tied to a dated, sourced event or a published tool specification, and the three add exactly to the volume leg.

The 200 mm conversion adds 4.3 points. STMicroelectronics plans a Catania SiC campus with about EUR 5 billion of investment and up to 15,000 wafers per week at full capacity, with production from 2026 and full ramp in 2033, [as its 31 May 2024 release states](https://investors.st.com/static-files/40498d46-62f3-4ef1-a6fb-1da1a4c36b8b). Every 200 mm SiC line needs new slicers and dicers, because 6-inch laser tools cannot take an 8-inch chuck. Douglas Insights estimates that 200 mm projects account for 41% of 2026 to 2030 SiC laser tool orders.

Traction inverters, onboard chargers and fast chargers add 3.6 points. Power modules in battery electric vehicles and DC chargers are the largest use of SiC metal-oxide-semiconductor field-effect transistors (MOSFETs), and each 1,200 V die must be singulated without edge chipping that would cut its blocking voltage. Wolfspeed alone cites more than USD 12 billion of cumulative power design-wins in investor materials filed with the SEC, a pipeline that turns into wafer starts and then dicing hours.

Substitution of laser slicing for diamond wire adds 2.9 points. DISCO says its KABRA process slices a 6-inch SiC ingot in about 31 hours against about 100 hours for a wire saw, with about 80 µm of loss per wafer against about 180 µm, yielding about 1.4 times as many wafers per ingot, [on its KABRA page](https://disco.co.jp/kabra/index_eg.html). That is a 69.0% cut in slicing time on the most expensive material in the device. Substrate makers who still run wire saws face a cost gap of that size on every boule. Douglas Insights calculates that a plant slicing 2,000 six-inch ingots a year frees about 138,000 saw hours by switching to laser.

A broader signal sits behind all three. DISCO reported that cumulative laser saw shipments passed 4,000 units in February 2026, after the first 2,000 took 18 years and the next 2,000 took six, and it says laser ingot slicing has been widely adopted in SiC wafer manufacturing ([DISCO news release](https://disco.co.jp/eg/news/corp/20260302.html)). The laser cutting equipment installed base is therefore compounding faster than SiC wafer area itself.

## What headwinds slow silicon carbide laser cutting equipment orders?

Three headwinds remove 2.8 points from the silicon carbide laser cutting equipment volume leg relative to an unconstrained path: SiC device overcapacity (1.6 points), export controls (0.7 points) and slow process qualification (0.5 points).

Overcapacity in SiC devices removes 1.6 points. Wolfspeed expected Mohawk Valley fab utilisation of about 20% in fiscal 2025, rising to a 50% target by fiscal 2029, in its June 2025 investor presentation, and it later went through Chapter 11 before emerging on 29 September 2025 ([Wolfspeed](https://investor.wolfspeed.com/news/news-details/2025/Wolfspeed-Successfully-Completes-Financial-Restructuring-Emerges-as-Financially-Stronger-Company-Well-Positioned-in-Silicon-Carbide-Market/default.aspx)). DISCO also said power semiconductor sales fell in its latest fiscal year even as generative AI tools grew. Idle wafer capacity delays laser tool orders by 12 to 24 months.

Export controls remove 0.7 points. The U.S. Bureau of Industry and Security (BIS) tightened controls on semiconductor manufacturing equipment in an interim final rule effective 2 December 2024 and published on 5 December 2024 ([Federal Register](https://www.govinfo.gov/content/pkg/FR-2024-12-05/html/2024-28270.htm)). SiC laser saws are not advanced-node tools, yet licence screening slows shipments of U.S.-content subsystems to some Chinese buyers and pushes them toward local suppliers.

Qualification time removes 0.5 points. A new SiC laser cutting process must pass die strength, leakage and reliability tests across 3 to 5 lots before an automotive IDM releases it, so a tool bought in one year often enters volume 9 to 15 months later.

## Who supplies SiC laser saws and stealth dicing engines, and how concentrated is the field?

DISCO leads silicon carbide wafer laser cutting equipment with an estimated 41.8% share of 2025 revenue, and the top three suppliers hold 57.7%. The basis is DISCO laser saw shipment data, product ranges and our per-tool price bands, so all shares here are Douglas Insights estimates.

| Company | Estimated 2025 share | Position built on |
| --- | --- | --- |
| DISCO | 41.8% | KABRA ingot slicing and Stealth Dicing laser saws |
| Han's Laser | 9.6% | SiC wafer stealth dicing machine for 4-inch and 6-inch wafers |
| ASMPT | 6.3% | ALSI multi-beam laser dicing and grooving |
| Hamamatsu Photonics | 5.9% | Stealth Dicing engine technology |
| 3D-Micromac | 4.7% | microDICE thermal laser separation |
| Synova | 3.2% | Laser MicroJet water-guided laser |
| Others | 28.5% | Chinese and regional laser specialists |

DISCO builds its lead on two franchises. Its KABRA laser slicing line handles 8-inch ingots up to 40 mm thick on the KABRA!zen, and its DFL7341 laser saw runs the Stealth Dicing process for 8-inch SiC and GaN wafers. Douglas Insights reckons DISCO shipped about 112 of the 268 SiC laser tools in 2025. Laser saws made up 16% of DISCO equipment shipments in its latest fiscal year, the same share as blade dicers.

Hamamatsu Photonics owns the Stealth Dicing technology and sells the engine; DISCO operates as its alliance partner for system integration. Hamamatsu quotes 350 mm/s with 5 scans for a 350 µm SiC wafer, against 1,000 mm/s with 1 scan for silicon, which shows why SiC dicing time per wafer is so much longer.

Han's Laser sells a SiC wafer stealth dicing machine for 4-inch and 6-inch wafers at 400 to 1,000 mm/s, with a yield rate of at least 99.5% on its product page; its price advantage is strongest in Chinese 6-inch fabs. ASMPT, through ALSI, calls itself the inventor of multi-beam laser dicing and grooving and lists SiC among the materials for the LASER1205.

3D-Micromac sells microDICE, which uses thermal laser separation (TLS) to split SiC at up to 300 mm per second with micro-crack-free edges. Synova, based in Duillier, Switzerland, guides a green laser inside a hair-thin water jet for cutting without heat damage. The 28.5% left to others is mostly Chinese laser specialists selling into domestic 6-inch lines.

## Where are silicon carbide laser cutting systems installed, by region?

Asia Pacific buys 61.9% of silicon carbide wafer laser cutting equipment, USD 94.8 million in 2025, because China, Japan and Malaysia hold most SiC substrate and device lines. The Middle East and Africa grows fastest from a small base.

Asia Pacific rises to USD 363.0 million by 2035 at 14.37% a year, driven by Chinese 6-inch to 8-inch substrate conversion and Japanese laser saw makers selling at home.

Europe holds USD 29.7 million in 2025 and reaches USD 108.0 million at 13.78%, as STMicroelectronics in Catania and Infineon in Villach move SiC device output to 200 mm.

North America is worth USD 24.6 million and grows 12.7% to USD 81.3 million; growth is the slowest of the major regions because Wolfspeed is using existing 200 mm capacity before buying more tools.

The Middle East and Africa start at USD 2.6 million and grow fastest, at 16.3% a year, to USD 11.8 million, on planned power-semiconductor packaging and test sites in the Gulf.

Latin America is the wildcard: USD 1.4 million in 2025 and USD 4.1 million by 2035 at 11.34%, which our model ties mainly to laser dicing for automotive power module assembly in Mexico. Douglas Insights models each of the five regions separately and they add exactly to the global USD 153.1 million.

## How fast does the 8-inch SiC wafer share of laser cutting tool spending rise?

8-inch tools take 47.2% of silicon carbide wafer laser cutting equipment value in 2025 and 79.0% by 2035 in our model, as 200 mm SiC lines replace 150 mm ones. 6-inch tools still earn USD 119.1 million in 2035, mostly in Chinese substrate and device fabs.

Infineon has begun shipping its first SiC products made on 200 mm wafers from Villach and Kulim, and Wolfspeed describes a vertically integrated 200 mm manufacturing footprint. An 8-inch laser saw processes about 1.78 times the wafer area of a 6-inch tool per wafer, so fewer tools serve the same area, which is why tool count grows more slowly than wafer area.

Laser ingot slicing systems shift fastest, from 52.4% 8-inch in 2025 to 84.1% in 2035. Laser ablation and grooving systems shift slowest, from 39.5% to 68.2%, because older 6-inch device fabs keep them running.

## Who buys SiC wafer laser cutting equipment: IDMs, foundries or substrate makers?

SiC substrate makers buy about 44.6% of silicon carbide wafer laser cutting equipment value in 2025, because they own the ingot slicing step. IDMs take 39.2% for dicing their own device wafers, and foundries take the remaining 16.2%.

Integrated device manufacturers (IDMs) such as STMicroelectronics, Infineon and Wolfspeed run substrate, epitaxy, front-end and back-end on one site, so their purchases cover both slicing and dicing. Foundries buy mainly stealth dicing and ablation tools. Their share rises to 19.8% by 2035 in our model as fabless SiC designers outsource more wafers.

## Laser slicing or diamond wire: which saves more SiC ingot per wafer?

Laser slicing saves about 100 µm of SiC per wafer against diamond wire, roughly 55.6% of the 180 µm wire loss, according to the DISCO figures cited above. That saving is the core economic case for silicon carbide wafer laser cutting equipment.

A 6-inch SiC ingot yields about 1.4 times as many wafers when sliced by laser, and slicing time falls from about 100 hours to about 31 hours. Because substrate cost is typically the largest single cost in a SiC power device, each extra wafer from the same boule lowers device cost directly.

Wire saws keep two advantages. They cost less per tool and are already depreciated in many Chinese substrate plants. Douglas Insights expects wire to still slice about 38% of SiC ingots by area in 2030, falling below 20% by 2035.

## What does the 2035 forecast for SiC laser cutting equipment look like in three cases?

The base case reaches USD 568.2 million by 2035 at 14.01% a year, from 10.8% volume and 2.9% price growth. The slower case gives USD 391.7 million and the faster case USD 780.5 million for silicon carbide wafer laser cutting equipment.

| Case | Volume leg | Price leg | Revenue CAGR | 2035 value |
| --- | --- | --- | --- | --- |
| Slower | 7.8% | 1.9% | 9.85% | USD 391.7 million |
| Base case | 10.8% | 2.9% | 14.01% | USD 568.2 million |
| Faster | 13.6% | 3.6% | 17.69% | USD 780.5 million |

The slower case assumes SiC device overcapacity lasts to 2028 and Chinese price cuts deepen; the faster case assumes 200 mm conversion completes by 2031 and laser slicing replaces nearly all wire. Adding one point to annual volume growth lifts the 2035 value by USD 53.5 million. Published forecasts for this equipment run from about 14.11% to 16.3% a year, so our 14.01% sits just below that range. We are lower because Wolfspeed emerged from Chapter 11 on 29 September 2025 with Mohawk Valley still underused, and that spare capacity defers tool orders [(Wolfspeed)](https://investor.wolfspeed.com/news/news-details/2025/Wolfspeed-Successfully-Completes-Financial-Restructuring-Emerges-as-Financially-Stronger-Company-Well-Positioned-in-Silicon-Carbide-Market/default.aspx).

## Which export control and laser safety rules govern SiC wafer laser cutting equipment?

Two rule sets shape silicon carbide wafer laser cutting equipment: U.S. export controls on semiconductor manufacturing equipment, and laser product performance standards such as 21 CFR 1040.10. Neither stops sales, but both add cost and lead time.

Under [21 CFR 1040.10](https://www.ecfr.gov/current/title-21/chapter-I/subchapter-J/part-1040/section-1040.10), laser products are classed from Class I to Class IV, and Class IV lasers need a protective housing, safety interlocks, a remote interlock connector, a key-actuated master control and an emission indicator. The industrial lasers inside SiC laser saws are high-power sources, so tool makers enclose them to reach Class I at the operator.

The same BIS rule added foreign direct product rules for certain semiconductor manufacturing equipment made abroad with U.S. technology. Japanese and European laser saw makers screen U.S.-origin content in each SiC tool for Chinese orders, which adds 4 to 10 weeks to some deliveries in our estimate. Read the related [Semiconductor Wafer Handling Robots Market](https://www.douglasinsights.com/semiconductor-wafer-handling-robots-market/) report for the same rules applied to wafer automation.

## Douglas Exclusive: the SiC Laser Process Atlas

The SiC Laser Process Atlas is a Douglas Insights model, built from 14 sourced inputs and 40 modelled cells: 4 process types, 2 wafer sizes and 5 regions for silicon carbide wafer laser cutting equipment. It is our own model, not an official register.

Each cell holds 2025 and 2035 value. The inputs are the DISCO KABRA throughput and loss figures, the DISCO shipment milestones and product split, Hamamatsu and Han's Laser scan speeds, the 3D-Micromac and ASMPT product data, the STMicroelectronics capacity plan, the Wolfspeed utilisation and restructuring data, the Infineon 200 mm rollout, the BIS rule and four published growth rates.

The finding: the single 8-inch laser ingot slicing cell in Asia Pacific is worth USD 133.0 million by 2035, or 23.4% of the whole market, larger than all of North America at USD 81.3 million. The 8-inch slicing cell in Europe adds another 7.0% of 2035 value. A supplier that wins 8-inch slicing in those two regions reaches 30.4% of 2035 revenue without selling a single dicing tool.

## How the model counts SiC laser cutting systems: what arithmetic and cross-checks?

Douglas Insights counts 268 SiC laser cutting systems in 2025 across 21 countries and multiplies by a USD 571,300 blended price to reach USD 153.1 million. The model holds 64 data points: 40 atlas cells, 14 sourced inputs and 10 years of two growth legs.

Volume grows 10.8% and price 2.9% a year, so 2035 revenue is USD 153.1 million x (1.108 x 1.029)^10 = USD 568.2 million, with about 747 systems at USD 760.4 thousand each. Cross-check one: DISCO shipped about 333 laser saws a year on average between 2020 and early 2026 across all uses; our 112 DISCO SiC tools equal 33.6% of that run-rate. Cross-check two: a published 2024 shipment count of 242 units at about USD 578,000 implies USD 139.9 million, and our 2025 figure is 9.5% higher, in line with unit growth. Cross-check three: the price-band mix implies 268 tools against 268 counted. For adjacent wafer process tools, see the [Semiconductor Silicon Wafer Polishing Machines Market](https://www.douglasinsights.com/semiconductor-silicon-wafer-polishing-machines-market/) and the [Synthetic Sapphire Market](https://www.douglasinsights.com/synthetic-sapphire-market/), another hard substrate cut by laser.

## Market by segment

| Segment | Share | Value |
| --- | --- | --- |
| Laser ingot slicing systems | 38.6% | $59.1 Mn |
| Stealth dicing systems | 31.7% | $48.5 Mn |
| Laser ablation and grooving systems | 17.2% | $26.3 Mn |
| Thermal laser separation and water-guided laser systems | 12.5% | $19.2 Mn |

## Market by region (USD million)

| Region | 2025 | 2026 | 2035 | CAGR 2026-2035 |
| --- | --- | --- | --- | --- |
| Global | 153.1 | 174.5 | 568.2 | 14.01% |
| Asia Pacific | 94.8 | 108.4 | 363 | 14.37% |
| Europe | 29.7 | 33.8 | 108 | 13.78% |
| North America | 24.6 | 27.7 | 81.3 | 12.7% |
| Middle East and Africa | 2.6 | 3 | 11.8 | 16.3% |
| Latin America | 1.4 | 1.6 | 4.1 | 11.34% |

## Dataset

| Series | Value | Unit |
| --- | --- | --- |
| Market size 2025 | 153.1 | USD million |
| Market size 2035 | 568.2 | USD million |
| Revenue CAGR 2026-2035 | 14.01 | percent |
| Volume CAGR 2026-2035 | 10.8 | percent |
| Price per system CAGR 2026-2035 | 2.9 | percent |

## Frequently asked questions

### What will SiC wafer laser cutting tools be worth in 2035?

USD 568.2 million by 2035, up from USD 153.1 million in 2025, at 14.01% a year from 10.8% volume growth and 2.9% price growth.

### What does a laser ingot slicing system for SiC cost?

USD 0.95 million to USD 1.35 million for a fully automatic laser ingot slicing system in 2025, the most expensive laser tool in a SiC wafer line.

### How much SiC does laser slicing save compared with diamond wire?

About 100 µm per wafer: laser slicing loses about 80 µm against about 180 µm for wire, giving about 1.4 times as many wafers per ingot.

### Which company has the largest share of SiC laser cutting equipment?

41.8% for DISCO, a Douglas Insights estimate of 2025 revenue; the top three suppliers hold 57.7%.

### How many SiC laser cutting systems shipped in 2025?

268 systems in 2025 by our count, at an average USD 571,300 each, rising to about 747 systems a year by 2035.

### When do 8-inch tools take most SiC laser cutting spending?

47.2% of 2025 value is already 8-inch, and the 8-inch share reaches 79.0% by 2035 as 200 mm SiC lines replace 150 mm lines.

### Which region buys the most SiC laser cutting equipment?

61.9% goes to Asia Pacific, USD 94.8 million in 2025, led by Chinese, Japanese and Malaysian SiC substrate and device lines.

### Why is the Douglas Insights forecast below published ranges?

14.01% against published rates of about 14.11% to 16.3%, because SiC device overcapacity, shown by Wolfspeed Mohawk Valley utilisation of about 20% in fiscal 2025, defers tool orders.

## Sources

- [Wolfspeed, Wolfspeed completes financial restructuring](https://investor.wolfspeed.com/news/news-details/2025/Wolfspeed-Successfully-Completes-Financial-Restructuring-Emerges-as-Financially-Stronger-Company-Well-Positioned-in-Silicon-Carbide-Market/default.aspx)
- [DISCO Corporation, Laser Saw Shipments Exceed 4,000 Units](https://disco.co.jp/eg/news/corp/20260302.html)
- [DISCO Corporation, What's KABRA?](https://disco.co.jp/kabra/index_eg.html)
- [STMicroelectronics, ST fully integrated SiC facility in Italy](https://investors.st.com/static-files/40498d46-62f3-4ef1-a6fb-1da1a4c36b8b)
- [eCFR, U.S. Government, 21 CFR 1040.10 Laser products](https://www.ecfr.gov/current/title-21/chapter-I/subchapter-J/part-1040/section-1040.10)
- [Federal Register, BIS interim final rule on SME controls](https://www.govinfo.gov/content/pkg/FR-2024-12-05/html/2024-28270.htm)
- [Infineon Technologies, Infineon 200 mm SiC milestone](https://www.infineon.com/assets/row/public/documents/corporate/press/press-releases/business-financial-press/2025/next-milestone-200-mm-silicon-carbide.pdf)
- [DISCO Corporation, DISCO FY2025 financial results](https://www.disco.co.jp/eg/ir/library/doc/film/20260422.pdf)

## How to cite

Douglas Insights, "Silicon Carbide Wafer Laser Cutting Equipment Market", DI-IT-10528, updated 2026-10-07, https://www.douglasinsights.com/silicon-carbide-wafer-laser-cutting-equipment-market/