Century Plyboards sold 4,30,713 cubic metres of medium-density fibreboard (MDF) in the year to March 2026, up 22.9%, and 1,07,500 cubic metres of particle board, up 53.4%, while its plywood volume rose 16.5% to 4,85,403 cubic metres, its investor presentation of 31 July 2026 shows. Indian homes are fitting modular kitchens and wardrobes, and since quality control orders cut panel imports in 2025, domestic mills supply almost all of them. The India wood product market covers sawnwood and wood-based panels made by Indian mills: plywood and laminated veneer lumber (LVL), MDF and other fibreboard, particleboard, and coniferous and non-coniferous sawnwood. Douglas Insights sizes it at USD 8.52 billion in 2025, from about 23.5 million cubic metres at an average mill price of USD 362.8 (23.5 million x USD 362.8 = USD 8.53 billion), and at USD 20.2 billion in 2035, a compound annual growth rate (CAGR) of 9.00%. It is the India row of our Asia Pacific Wood Product Market report and part of our global Wood Product Market study, sits beside our Laminated Veneer Lumber Market and Melamine Market reports inside our construction materials coverage, and every figure follows the Douglas Insights research methodology.
Which wood product earns the most in India: plywood, MDF, particleboard or sawn timber?
Plywood earns the most, 46.0% of 2025 India wood product value or USD 3.92 billion, a Douglas Insights estimate, but particleboard grows fastest at 13.0% a year to USD 2.89 billion by 2035.
| Product | Share 2025 | Value 2025 | CAGR 2026-2035 | Value 2035 |
|---|---|---|---|---|
| Plywood and LVL | 46.0% | USD 3.92 billion | 8.20% | USD 8.62 billion |
| Fibreboard (mainly MDF) | 18.0% | USD 1.53 billion | 11.00% | USD 4.36 billion |
| Non-coniferous sawnwood | 16.0% | USD 1.36 billion | 6.00% | USD 2.44 billion |
| Particleboard | 10.0% | USD 852.5 million | 13.00% | USD 2.89 billion |
| Coniferous sawnwood | 10.0% | USD 852.5 million | 7.00% | USD 1.68 billion |
Plywood carries 46.0% of India wood product value, against 26.0% for plywood and LVL across Asia Pacific in our parent model, because Indian carpenters still build kitchens, wardrobes and doors on site from branded, termite-treated boards. Plywood is also the most expensive board per cubic metre: Century Plyboards realised Rs 55,878 a cubic metre on plywood in the year to March 2026, about USD 642 at Rs 87 to the dollar, against Rs 29,527 for MDF and Rs 18,257 for particle board, its July 2026 presentation shows. Plywood grows 8.20% a year in our base case, below the market, as factory-made furniture shifts demand toward cheaper engineered panels.
Fibreboard, USD 1.53 billion, grows 11.00% a year to USD 4.36 billion because MDF machines cleanly, takes laminates and lacquers, and feeds the flat-pack and modular furniture lines that Indian retailers and kitchen brands now run. Particleboard is the smallest panel pool at USD 852.5 million but grows fastest, 13.00% a year, as new continuous-press lines in southern India give furniture makers a domestic alternative to imported board. Non-coniferous sawnwood, USD 1.36 billion, covers sal, teak, rubberwood and imported tropical hardwood sawn for doors, frames and furniture, and coniferous sawnwood, USD 852.5 million, covers pine cut from imported New Zealand radiata logs and Himalayan species for packaging and joinery. Product values sum to USD 9.27 billion in 2026, 0.26% below the headline, and USD 20.0 billion in 2035, 0.93% below it, inside our 2.5% tolerance.
Why does India wood product volume grow 6.0% a year to 2035?
Four drivers add 6.3 points of yearly volume growth and two restraints remove 0.3, leaving 6.0%: modular furniture 2.4 points, housing 1.8, import substitution 1.2, and packaging and engineered wood 0.9.
All four contributions are Douglas Insights estimates unless a source is linked. On a base of about 23.5 million cubic metres, 6.0% adds about 1.41 million cubic metres in 2026 and lifts India wood product output to about 42.1 million cubic metres in 2035. Price adds 2.83% a year on top, so (1.060 x 1.0283) minus 1 gives the 9.00% revenue rate and about USD 11.7 billion of extra yearly mill revenue by 2035.
Modular furniture and interiors: 2.4 points
Modular kitchens, wardrobes and office furniture are the largest source of new panel demand. Century Plyboards’ MDF volume rose 22.4% and its particle board volume 155.7% in the quarter to June 2026, against the same quarter a year earlier, its 31 July 2026 presentation shows, and in the quarter to September 2026 its particle board revenue crossed Rs 100 crore, up 211%, while MDF reached a record Rs 380 crore, exchange4media reported on 6 November 2026. Wood-based furniture is nearly 65% of India’s furniture market, the Federation of Indian Plywood and Panel Industry (FIPPI) noted on 31 December 2025. Each 1% shift of furniture output from site-built plywood to factory MDF and particleboard adds volume, because engineered panels use more board per cabinet than solid frames.
Urban and rural housing: 1.8 points
New homes need doors, frames, shutters and fitted storage. The central government has approved 18.77 lakh houses, about 1.88 million, under the Pradhan Mantri Awas Yojana-Urban (PMAY-U) 2.0 programme, All India Radio reported on 12 September 2026, after its Central Sanctioning and Monitoring Committee added about 29,000 more. We estimate an average new urban home uses 0.8 to 1.2 cubic metres of plywood, MDF and sawn timber in doors, frames and a basic kitchen, so a million completions a year add close to 1 million cubic metres of demand, a Douglas Insights estimate. Private apartments add more board per unit because buyers fit wardrobes and modular kitchens before moving in.
Import substitution under quality rules: 1.2 points
Bureau of Indian Standards (BIS) quality control orders on plywood and panels took effect in February 2025, and from March 2025 every consignment had to come from a BIS-licensed maker. India imported Rs 3,431 crore of plywood and panels in 2024-25, growing over 14% a year for five years, but monthly MDF imports fell from Rs 103 crore in January 2025 to between Rs 19 crore and Rs 32 crore a month from March to August, FIPPI found. Plywood imports fell from Rs 136 crore in March to Rs 32 crore in August 2025. Domestic mills took that demand, which is why 2025 and 2026 volumes run above the long-run trend.
Packaging, pallets and engineered wood: 0.9 points
Manufacturing growth lifts demand for pallets, crates and cable drums, mostly sawn from imported pine and plantation eucalyptus, and LVL and plywood for scaffolding, formwork and truck bodies. The India-New Zealand free trade agreement, concluded on 22 December 2025, will let over 95% of New Zealand’s forestry exports enter India tariff-free from entry into force, with tariffs on almost all existing trade phased out over seven years, New Zealand’s Ministry of Foreign Affairs and Trade states. Cheaper radiata pine logs lower sawmill costs at Kandla and Tuticorin and favour pine packaging over steel and plastic.
What holds back India wood product demand: timber costs, MDF overcapacity or export tariffs?
Two restraints remove 0.3 points a year from volume growth, Douglas Insights estimates: timber and resin cost inflation takes 0.2 points, and weak furniture and panel exports take 0.1. MDF overcapacity hits price more than volume.
Raw material cost is the larger drag on India wood product volume. Indian panel mills depend on plantation eucalyptus, poplar and melia grown by farmers, plus urea-formaldehyde and melamine resins. Century Plyboards said it had “passed on or tried to pass on the majority of raw material inflation” through price increases in each category in the quarter to September 2026, Business Line reported via TradingView, and its cost of materials consumed rose 45.33%, faster than its 28.5% revenue growth. Higher board prices slow the switch from unbranded to branded panels in small towns, so we remove 0.2 points of volume.
Exports remove 0.1 points. Greenpanel Industries said its exports were flat in the quarter to September 2026 because of Middle East freight disruption, while new South Indian MDF capacity raised competition for furniture-maker (OEM) orders and some OEMs turned to imports after its price rise, Multibagg summarised from its call on 2 November 2026; its total MDF volume fell 3.4% while retail MDF rose 17%. United States tariffs also weighed on Indian furniture exports in 2025, until the White House cut the reciprocal tariff on India from 25% to 18% and removed an additional 25% tariff on 9 February 2026, its fact sheet states. Both restraints are netted into the 9.00% base case.
Where in India does wood product revenue concentrate, and which region grows fastest?
South India earns the most and grows fastest, USD 2.64 billion or 31.0% of 2025 value rising 9.60% a year to USD 6.61 billion by 2035, as new MDF and particleboard lines open in Andhra Pradesh and Tamil Nadu.
| Region | Value 2025 | Share 2025 | Value 2026 | CAGR 2026-2035 | Value 2035 |
|---|---|---|---|---|---|
| India | USD 8.52 billion | 100% | USD 9.29 billion | 9.00% | USD 20.2 billion |
| South | USD 2.64 billion | 31.0% | USD 2.90 billion | 9.60% | USD 6.61 billion |
| West | USD 2.39 billion | 28.0% | USD 2.61 billion | 9.20% | USD 5.76 billion |
| North | USD 2.30 billion | 27.0% | USD 2.50 billion | 8.60% | USD 5.25 billion |
| East and North-East | USD 1.19 billion | 14.0% | USD 1.29 billion | 8.20% | USD 2.62 billion |
The South leads because it combines the largest apartment markets in Bengaluru, Hyderabad and Chennai with the newest panel capacity. Century Plyboards budgeted Rs 600 crore for a greenfield MDF plant in Andhra Pradesh and Rs 550 crore for a particle board plant at Chennai, its July 2026 presentation shows, and Greenpanel runs its third MDF line in Andhra Pradesh. Kerala’s rubberwood mills also supply furniture and particleboard. The West, USD 2.39 billion, grows 9.20% on Mumbai and Pune housing, Gujarat’s timber ports at Kandla, where most imported logs land, and Greenply’s MDF plant at Vadodara, where a 210,000 cubic metre line is being added to the existing 300,000, Business News Today reported on 31 October 2026.
The North, USD 2.30 billion, is India’s plywood heartland: the Yamunanagar cluster in Haryana peels poplar and eucalyptus from Punjab, Haryana and Uttar Pradesh farms, and Century expands MDF at Hoshiarpur in Punjab. It grows 8.60% because plywood, its main product, grows slower than MDF and particleboard. Greenply is adding 15 million square metres of plywood capacity at Sandila in Uttar Pradesh for Rs 125 crore by March 2028, the same report states. The East and North-East, USD 1.19 billion, grows 8.20% on housing in Bihar, Odisha and West Bengal, where Greenply is building a 13.5 million square metre plywood plant at Koraput. Regional values sum to USD 9.29 billion in 2026, 0.02% above the headline, and USD 20.2 billion in 2035, 0.30% above it.
Which companies lead India’s wood product mills: Century Plyboards, Greenply or Greenpanel?
Century Plyboards leads with about 5.6% of 2025 India wood product value, a Douglas Insights estimate; with Greenply at 3.5% and Greenpanel at 2.0%, the top three hold about 11.1%; thousands of small mills share the rest.
| Company | Main products and plants | Estimated share 2025 | Estimated value 2025 |
|---|---|---|---|
| Century Plyboards | Plywood, MDF, particle board; Kolkata, Punjab, Andhra Pradesh, Chennai | 5.6% | USD 480.5 million |
| Greenply Industries | Plywood at Sandila and other sites; MDF at Vadodara | 3.5% | USD 298.4 million |
| Greenpanel Industries | MDF in Andhra Pradesh and Uttarakhand; plywood | 2.0% | USD 170.5 million |
| Rushil Decor | MDF and laminates in Karnataka and Andhra Pradesh | 1.0% | USD 85.2 million |
| Other mills | Action TESA, Merino, Archidply, Kitply, Yamunanagar units, sawmills | 87.9% | USD 7.49 billion |
The Century figure converts Rs 4,180 crore of plywood, MDF and particle board net sales in the year to March 2026, from its 31 July 2026 presentation, at Rs 87 to the dollar; the other shares are Douglas Insights estimates from quarterly revenue. Century is still accelerating: its revenue rose 28.5% to Rs 1,780 crore in the quarter to September 2026, with plywood up 28.6% to Rs 982 crore, exchange4media reported. Greenply’s revenue rose 16.1% to Rs 799.7 crore in the same quarter, with plywood and allied products at Rs 625.7 crore and MDF at Rs 173.9 crore, the Free Press Journal reported on 29 October 2026 from its exchange filing.
Greenply’s plywood plants ran at nearly 98% of their 52.8 million square metre capacity, its plywood volume rose 6.1% to 23 million square metres and its MDF volume rose 16.1% to 54,605 cubic metres, Business News Today reported. Greenpanel, India’s largest MDF maker by its own description, grew revenue 4.6% to Rs 407.3 crore in the quarter to September 2026 but saw its operating margin fall to 7.5%, Multibagg reported on 5 November 2026. Rushil Decor, which makes MDF and laminates, reported record revenue of Rs 295.3 crore for the same quarter, Multibagg reported. Below these listed firms, the market fragments: Action TESA and Merino run large private panel and laminate businesses, and hundreds of plywood units in Yamunanagar, Gandhidham and Kerala sell unbranded boards through local timber markets.
What does a cubic metre of plywood, MDF or particleboard fetch at an Indian mill?
The blended India mill price was USD 362.8 a cubic metre in 2025, Douglas Insights estimates, from about USD 160 for plain particleboard to over USD 640 for branded plywood, and rises to about USD 480 by 2035.
| Product | Typical mill price, 2025 | What sets the price |
|---|---|---|
| Plain particleboard | USD 160 to USD 230 a cubic metre | Wood chips, resin, press size |
| Coniferous sawnwood | USD 220 to USD 320 a cubic metre | Imported pine log price, freight |
| Plain MDF | USD 280 to USD 360 a cubic metre | Eucalyptus chips, resin, density |
| Non-coniferous sawnwood | USD 280 to USD 700 a cubic metre | Species: rubberwood low, teak high |
| Prelaminated MDF | USD 450 to USD 520 a cubic metre | Decor paper, melamine resin |
| Branded plywood | USD 550 to USD 700 a cubic metre | Face veneer, grade, termite treatment |
| All products | USD 362.8 average | Douglas Insights estimate |
India wood product prices rise from USD 362.8 in 2025 to about USD 373.1 in 2026 and USD 479.6 in 2035 in our base case, 2.83% a year in dollars. Mix adds about 0.9 points as buyers move from plain to prelaminated boards, and rupee list increases, net of currency, add about 1.9 points. Company data anchor the bands: Century realised Rs 59,179 a cubic metre on plywood in the quarter to June 2026, up 4.8%, Rs 32,222 on MDF, up 5.9%, and Rs 20,678 on particle board, its presentation shows. Greenply’s plywood realisation rose about 9% to Rs 264 a square metre and its MDF realisation 2.1% to Rs 31,816 a cubic metre in the quarter to September 2026, Business News Today reported.
India’s average price is about 51% above the USD 239.8 Asia Pacific average in our parent model, a Douglas Insights comparison, because plywood is 46.0% of Indian value and Indian buyers pay for branded, warranty-backed boards. MDF is the price risk: new lines in South India add supply faster than OEM demand, and Greenpanel’s domestic MDF price rose 13.5% in one quarter only to fall 6% to 7% in the next, as summarised by Multibagg. We therefore hold MDF prices flat in real terms to 2028.
Which rules shape India’s wood product mills: BIS quality orders, the furniture QCO or tree-felling reform?
Three rule sets shape India’s wood product mills: BIS quality control orders on plywood and panels from February 2025, the Furniture (Quality Control) Order from 13 February 2026, and the June 2025 model rules that free farm timber.
The panel quality orders closed the import door. From March 2025, plywood, MDF and particle board could enter India only from BIS-licensed makers; by August 2025 only nine foreign plywood makers, all in Nepal, held licences, two foreign MDF makers, Vanachai Panel Industries of Thailand and Robin Resources of Malaysia, held them, and no foreign particle board maker did, FIPPI found. The Furniture (Quality Control) Order, S.O. 801(E) of 13 February 2025, made BIS marking compulsory for work chairs, general-purpose chairs and stools, tables and desks, storage units, beds and bunk beds 12 months later, and an amendment, S.O. 774(E) of 12 February 2026, let traders sell declared pre-implementation stock for up to 12 months, the BIS gazette notice states. Imported furniture must now meet the same standards as Indian furniture, which protects demand for Indian panels.
Supply rules are loosening. The Ministry of Environment, Forest and Climate Change (MoEFCC) issued Model Rules for Felling of Trees in Agricultural Lands on 18 June 2025: farmers register plantations on the National Timber Management System portal, owners of up to 10 trees get an automatic no-objection certificate, and larger fellings need a verifying agency’s permit, the model rules state, with the aim of “reducing reliance on imports”. Once states adopt them, eucalyptus, poplar and melia growers can sell to mills with less paperwork. The New Zealand agreement adds an import route for pine logs, and India’s tariff offer gives immediate duty elimination on 30% of tariff lines, including wood, the Department of Commerce fact sheet states.
What range does India wood product revenue reach in 2035?
The India wood product market ends 2035 between USD 15.4 billion and USD 24.5 billion across our three cases, around a USD 20.2 billion base, with housing pace and MDF prices setting most of the spread.
| Case | Volume leg | Price leg | Revenue rate | 2035 value |
|---|---|---|---|---|
| Slower | 4.00% | 2.00% | 6.08% | USD 15.4 billion |
| Base case | 6.00% | 2.83% | 9.00% | USD 20.2 billion |
| Faster | 7.50% | 3.40% | 11.16% | USD 24.5 billion |
In the slower case, housing completions stall after PMAY-U 2.0 sanctions are exhausted, quality control orders are diluted for small traders, and MDF overcapacity drives a two-year price war, so volume grows 4.00% a year and price 2.00%. In the faster case, states adopt the farm timber rules quickly, the New Zealand agreement cuts log costs, organised furniture retail doubles its share and exports to the United States recover at the 18% tariff rate, lifting volume 7.50% a year. One extra point of yearly revenue growth adds about USD 1.93 billion to 2035 India wood product value; one point less removes about USD 1.78 billion.
Company signals sit near or above the base case. Century guided plywood revenue growth of over 25% and MDF growth of 16% to 18% for the year to March 2027, InvestyWise reported on 4 November 2026 from its results, Greenpanel expects Indian MDF demand to grow 15% to 17% a year, Multibagg reported from its call, and Greenply runs its plywood plants at nearly 98% utilisation. Our 9.00% India rate is the same as the India row of the parent Asia Pacific model, nearly double the 4.61% regional rate, because India adds housing and furniture demand while China’s construction shrinks.
Douglas Exclusive: the India Panel Import-Substitution Ledger
The India Panel Import-Substitution Ledger is a Douglas Insights model built from 11 inputs in documents dated February 2025 to November 2026. It measures how much panel demand quality rules moved from foreign to Indian mills.
| Date | Input | What it moves |
|---|---|---|
| February 2025 | BIS quality control orders on plywood and panels take effect | Import access |
| 13 February 2025 | Furniture QCO S.O. 801(E) published, mandatory from 13 February 2026 | Furniture imports |
| January-February 2025 | MDF imports Rs 103 crore and Rs 88 crore a month | Pre-rule baseline |
| March-August 2025 | MDF imports Rs 19 crore to Rs 32 crore a month, Rs 151 crore in total | Post-rule imports |
| March-August 2025 | Plywood imports Rs 361 crore; March Rs 136 crore, August Rs 32 crore | Post-rule imports |
| 18 June 2025 | MoEFCC model rules for felling trees on farm land | Domestic wood supply |
| 22 December 2025 | India-New Zealand trade agreement concluded | Log supply |
| 12 February 2026 | Furniture QCO amendment S.O. 774(E) | Stock clearance |
| 31 July 2026 | Century FY26 MDF volume +22.9%, particle board +53.4% | Domestic output |
| 29 October 2026 | Greenply MDF volume +16.1%, plywood utilisation nearly 98% | Domestic output |
| 2 November 2026 | Greenpanel: some OEMs return to imports after price rise | Price ceiling |
The first finding, a Douglas Insights estimate: MDF imports averaged Rs 95.5 crore a month in January and February 2025 and Rs 25.0 crore a month from March to August 2025, FIPPI’s data show. The Rs 70.5 crore monthly gap, about Rs 846 crore a year, equals about USD 97.2 million at Rs 87 to the dollar, or 6.3% of our USD 1.53 billion India fibreboard value for 2025. That single rule handed Indian MDF mills more than half of a normal year’s growth, which is why Century’s MDF volume rose 22.9% in the year to March 2026 while the long-run trend is near 11%.
The second finding is that the protection has a ceiling. When Greenpanel raised MDF prices in mid-2026, some furniture makers found licensed imports again, Multibagg’s summary of its call shows, and Thai and Malaysian licence holders can supply them. Domestic mills can price up to the landed cost of a licensed import and no further. We therefore model the import-substitution driver at 1.2 points from 2026 to 2028, falling to 0.4 points after 2030, once the one-time shift is complete and new Indian capacity, not imports, sets the MDF price.
How does the methodology turn 23.5 million cubic metres into USD 8.52 billion?
How this report is built
- Every figure carries a confidence grade in the fact sheet above, and the working model ships with every licence.
- Five regional models sum to the global figure, with country tables in the Excel model.
- The next scheduled review of this study is May 2027.
- Licence holders receive it as a maintained tab in the Excel model.
Our methodology multiplies about 23.5 million cubic metres of sawnwood and panels made in India in 2025 by an average mill price of USD 362.8 to reach USD 8.52 billion, built across five products and four regions.
The model uses 58 data points, 22 sourced and 36 modelled. Arithmetic: 23.5 million cubic metres x USD 362.8 = USD 8,525.8 million, within 0.01% of the India row; volume rises 6.0% a year to about 24.9 million cubic metres in 2026 and 42.1 million in 2035, and price rises 2.83% a year to USD 373.1 in 2026 and USD 479.6 in 2035. The 2026 value is USD 9.29 billion and the 2035 value USD 20.2 billion, a 9.00% CAGR on (1.060 x 1.0283) minus 1. Prices are mill-gate prices excluding goods and services tax, freight and dealer margins, converted at Rs 87 to the US dollar for 2025.
The study is the India row of our Asia Pacific Wood Product Market model: USD 8,524.9 million in 2025, 9.0% of the region, USD 9,292.1 million in 2026 and USD 20,181.5 million in 2035. Product volumes come from company disclosures scaled to the market: Century’s 4,85,403 cubic metres of plywood and 4,30,713 cubic metres of MDF in the year to March 2026 are about 7% of our plywood volume and 9% of our MDF volume, consistent with its estimated value shares.
Three cross-checks agree. First, India’s 2024-25 plywood and panel imports of Rs 3,431 crore, about USD 394 million, were roughly 5% of our 2025 domestic value, so the quality orders moved a meaningful but not dominant slice of demand. Second, the listed panel makers grew revenue 4.6% to 28.5% in the quarter to September 2026, bracketing our 9.00% rate. Third, India’s 23.5 million cubic metres is about 6% of the 395 million cubic metres in the parent Asia Pacific model, consistent with India’s 9.0% value share at a higher average price. AI tools help draft the text and automated checks test the arithmetic and links; the Douglas Insights research desk chooses the sources, builds the model and approves publication, as our editorial standards explain.
Sources
- Century Plyboards (India), NSE filing Century Plyboards investor presentation, 31 July 2026 (2026)
- exchange4media CenturyPly Q2 revenue rises 28.5% to Rs 1,780 crore (2026)
- Free Press Journal Greenply Industries Q2 FY27 revenue climbs 16.1% to Rs 799.7 crore (2026)
- Business News Today Greenply announces Rs 125 crore Sandila expansion (2026)
- Federation of Indian Plywood and Panel Industry (FIPPI) India's plywood and panel imports in the post-QCO era (2025)
- Ministry of Environment, Forest and Climate Change via PIB Model Rules for Felling of Trees in Agricultural Lands (2025)
- Bureau of Indian Standards Furniture (Quality Control) Amendment Order, 2026 (2026)
- Department of Commerce, Government of India India-New Zealand FTA fact sheet (2025)
- New Zealand Ministry of Foreign Affairs and Trade New Zealand-India Free Trade Agreement key outcomes (2025)
- All India Radio News Government approves 18.77 lakh houses under PMAY-U 2.0 (2026)
- The White House Fact Sheet: The United States and India announce historic trade deal (2026)
- Business Line via TradingView Century Plyboards Q2 net up 46% as all categories record strong volume growth (2026)
What counts in the India wood product market, and what is left out?
The market counts the mill value of sawnwood and wood-based panels produced in India across five products. Logs, wood pulp, paper, finished furniture, laminates sold separately, loose veneer, doors sold as finished units and pellets are excluded.
The by-product split covers plywood and LVL, fibreboard (mainly MDF), particleboard, non-coniferous sawnwood and coniferous sawnwood; the by-region split covers South, West, North, and East and North-East India. Branded and unbranded boards, prelaminated panels sold by panel mills, and timber sawn from imported logs at Indian sawmills all count, while imported finished panels do not. For how Indian demand compares with other markets, see our U.S. Wood Product Market and Europe Wood Product Market reports.
Inside the report
01Executive summary12 sections
The market in one view
- 1.1Market snapshot, 2025 and 2035
- 1.1.1Market size, 2025
- 1.1.2Forecast, 2035
- 1.1.3Growth rate, 2026–2035
- 1.2Growth decomposition
- 1.2.1Volume growth (million cubic metres)
- 1.2.2Value per unit growth
- 1.3Key findings
- 1.4Segment highlights
- 1.5Regional highlights
- 1.6Competitive highlights
- 1.7Douglas Insights verdict
02Scope and definitions15 sections
What counts and what is excluded
- 2.1Market definition
- 2.2Inclusions and exclusions
- 2.2.1Products
- 2.2.2Regions
- 2.2.3Exclusions
- 2.3Segmentation
- 2.3.1By product
- 2.3.2By region
- 2.4Years considered
- 2.4.1Base year 2025
- 2.4.2Forecast 2026–2035
- 2.5Currency and units
- 2.5.1Value in USD million
- 2.5.2Volume in million cubic metres
- 2.6Who this report is for
03Research methodology16 sections
Bottom-up: million cubic metres × value per unit
- 3.1Bottom-up market model
- 3.1.1Volume base, 2025 (million cubic metres)
- 3.1.2Value per unit
- 3.1.3Forecast legs to 2035
- 3.2Top-down cross-checks
- 3.3Data triangulation
- 3.4Sources
- 3.4.1Regulators and statistics offices
- 3.4.2Company filings and results
- 3.4.3Trade and industry bodies
- 3.4.412 primary sources cited
- 3.5Confidence grading
- 3.6Assumptions and limitations
- 3.6.1Arithmetic
- 3.6.2Parent reconciliation
- 3.6.3Cross-checks
04Products3 sections
Plywood, MDF, particleboard, sawnwood
- 4.1Shares
- 4.2Growth
- 4.3Price per cubic metre
05Growth drivers3 sections
Four forces behind 6.0% volume growth
- 5.1Modular furniture
- 5.2Housing
- 5.3Import substitution
06Restraints3 sections
Timber costs and exports
- 6.1Raw material inflation
- 6.2MDF competition
- 6.3Export tariffs
07Pricing3 sections
Mill price by product
- 7.1Bands
- 7.2Mix
- 7.3MDF price risk
08Regulation and trade3 sections
BIS orders, furniture QCO, felling rules
- 8.1Panel QCOs
- 8.2Furniture QCO
- 8.3Model felling rules
09Market size and forecast, 2025–20355 sections
Global value, volume and value per unit
- 9.1Market value, 2025–2035
- 9.2Volume (million cubic metres), 2025–2035
- 9.3Value per unit, 2025–2035
- 9.4Year-on-year growth
- 9.5Growth decomposition
10India Wood Product market, by product16 sections
5 segments, value 2025–2035
- 10.1Overview and share, 2025 and 2035
- 10.2Plywood and LVL
- 10.2.1Market size and forecast, 2025–2035
- 10.2.2Growth outlook
- 10.3Fibreboard (mainly MDF)
- 10.3.1Market size and forecast, 2025–2035
- 10.3.2Growth outlook
- 10.4Non-coniferous sawnwood
- 10.4.1Market size and forecast, 2025–2035
- 10.4.2Growth outlook
- 10.5Particleboard
- 10.5.1Market size and forecast, 2025–2035
- 10.5.2Growth outlook
- 10.6Coniferous sawnwood
- 10.6.1Market size and forecast, 2025–2035
- 10.6.2Growth outlook
11Regional analysis16 sections
5 regions
- 11.1Regional overview and share, 2025 and 2035
- 11.2India
- 11.2.1Market size and forecast, 2025–2035
- 11.2.2By product
- 11.3South
- 11.3.1Market size and forecast, 2025–2035
- 11.3.2By product
- 11.4West
- 11.4.1Market size and forecast, 2025–2035
- 11.4.2By product
- 11.5North
- 11.5.1Market size and forecast, 2025–2035
- 11.5.2By product
- 11.6East and North-East
- 11.6.1Market size and forecast, 2025–2035
- 11.6.2By product
12Competitive landscape8 sections
4 companies profiled
- 12.1Market concentration
- 12.2Market share analysis, 2025
- 12.3Strategic moves: acquisitions, launches, contracts
- 12.4Company profilesEach profile: overview, products, financials where reported, position in this market, recent developments
- 12.4.1Century Plyboards
- 12.4.2Greenply Industries
- 12.4.3Greenpanel Industries
- 12.4.4Rushil Decor
13Scenarios to 20355 sections
Slower, base and faster
- 13.1Slower case
- 13.2Base case case
- 13.3Faster case
- 13.4Sensitivity of the 2035 value
- 13.5Published forecasts compared
14Douglas Exclusive: the India Panel Import-Substitution Ledger3 sections
Eleven dated inputs
- 14.1Ledger
- 14.2Import loss
- 14.3Price ceiling
15Appendix5 sections
Data, sources and licence
- 15.1Data tables (Excel model)
- 15.2Sources (12)
- 15.3Abbreviations
- 15.4Change log and next review
- 15.5Licence and how to cite
TList of tables18
- Table 1Market value, 2025–2035 (USD million)
- Table 2Volume, 2025–2035 (million cubic metres)
- Table 3Value per unit, 2025–2035
- Table 4India Wood Product market by product, 2025–2035 (USD million)
- Table 5Plywood and LVL: market size, 2025–2035 (USD million)
- Table 6Fibreboard (mainly MDF): market size, 2025–2035 (USD million)
- Table 7Non-coniferous sawnwood: market size, 2025–2035 (USD million)
- Table 8Particleboard: market size, 2025–2035 (USD million)
- Table 9Coniferous sawnwood: market size, 2025–2035 (USD million)
- Table 10India Wood Product market by region, 2025–2035 (USD million)
- Table 11India: market by product, 2025–2035 (USD million)
- Table 12South: market by product, 2025–2035 (USD million)
- Table 13West: market by product, 2025–2035 (USD million)
- Table 14North: market by product, 2025–2035 (USD million)
- Table 15East and North-East: market by product, 2025–2035 (USD million)
- Table 16Company market shares, 2025
- Table 17Scenario values, 2035
- Table 18Sources and confidence grades by figure
FList of figures7
- Figure 1Market value, 2025–2035
- Figure 2Growth decomposition, 2026–2035
- Figure 3Share by product, 2025 and 2035
- Figure 4Share by region, 2025 and 2035
- Figure 5Growth by region, 2026–2035
- Figure 6Market concentration, 2025
- Figure 7Scenario paths to 2035
Questions buyers ask
What is the India wood product market worth in 2025 and 2035?
USD 8.52 billion in 2025, from about 23.5 million cubic metres at USD 362.8 each, rising to USD 20.2 billion by 2035 at a 9.00% CAGR.
Which wood product earns the most in India?
46.0% of 2025 value, USD 3.92 billion, comes from plywood and LVL; particleboard grows fastest at 13.00% a year.
Which Indian region buys and mills the most wood products?
31.0% of 2025 value, USD 2.64 billion, sits in South India, which also grows fastest at 9.60% a year to USD 6.61 billion by 2035.
Who leads India's wood product mills?
5.6% of 2025 value goes to Century Plyboards, Douglas Insights estimates; with Greenply at 3.5% and Greenpanel at 2.0% the top three hold about 11.1%.
What did India's quality control orders do to panel imports?
MDF imports fell from Rs 95.5 crore a month in January-February 2025 to Rs 25.0 crore from March to August, FIPPI data show; the gap is about USD 97.2 million a year.
How much does a cubic metre of wood product cost at an Indian mill?
USD 362.8 on average in 2025, from about USD 160 for plain particleboard to over USD 640 for branded plywood.
How far apart are the slower and faster 2035 cases?
USD 15.4 billion in the slower case and USD 24.5 billion in the faster case, against a USD 20.2 billion base.
Research & citation
This report was researched, written and reviewed by the Douglas Insights Research Desk under the Douglas Insights editorial standards. Material errors are logged in the corrections log. No section is sponsored.
Douglas Insights Inc (2026). India Wood Product Market. Report DI-CM-10948, November 2026. https://www.douglasinsights.com/india-wood-product-market/